Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EtherCAT Slave / CAN
Document code: MN67E07_ENG Revision 1.000 Page 12 of 29
ETHERNET:
The updating of the converter must be made using Connector8 of the HD67E07-A1 with at least a Category 5E cable. The maximum length
of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended
the use of a cross cable.
