Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EtherCAT Slave / BACnet Master
Document code: MN67E05_ENG Revision 1.000 Page 19 of 32
If selected “BACnet MS/TP” the means of the fields for “BACnet” are:
In the field “
Baudrate
” the baudrate of BACnet MS/TP side of the converter is
defined;
In the field “
Parity
” the parity of BACnet MS/TP side of the converter is defined;
In the field “
BACnet Device Name
” the name of BACnet MS/TP side of the
converter is defined;
In the field “
MAC Address
” the MAC of BACnet MS/TP side of the converter is
defined;
The field “
Max Masters
” specifies the highest allowable address for master nodes.
The value shall be less than or equal to 127;
The field “
Max Info Frames
” specifies the maximum number of information frames
the node may send before it must pass the token;
In the field “
Device Istance
” it is possible to assign a number to the BACnet node
(used for the Device Istance).
The means of the fields for “Ethernet” are:
In the fields “
IP Address
” the IP address for Ethernet side of the converter is
defined;
In the fields “
SubNet
Mask
” the SubNet Mask for Ethernet side of the converter is
defined;
In the fields “
Gateway
” the default gateway of the net is defined. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the fields “
DNS
” the IP address of the DNS server is defined
Figure 3b: “Set Communication” window
