ADF Web HD67873-A1-2A, User Manual

Page: 31 / 41

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual IO-Link / MQTT
Document code: MN67873_ENG Revision 1.000 Page 31 of 41
Figure 9: “ I/O Options ” section
The “I/O Options” section is used to define how linking the data from IO-Link pin 2 and pin 4 to MQTT side (Fig. 9).
The meanings of the fields are:
In the field “ Name ” the name of the IO-Link pin is defined;
In the field “ Access ” the access of the IO-Link pin is defined;
In the field “ Position ” the starting byte of the internal memory arrays where mapping/getting the value is defined;
In the field “ Start Bit ” the starting bit of the byte of the field “Position” is defined.
If the field “ Invert ” the value to map/get is inverted;
In the field “ Mnemonic ” a description of the variable is defined.
Note:
IO-Link pin 2 can only be read and IO-LINK pin 4 can be defined if “Pin 4 Mode” is set to “DIn” or “DOut” in “List of IO-Link Channel”
section.