ADF Web HD67873-A1-2A, User Manual

Page: 28 / 41

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual IO-Link / MQTT
Document code: MN67873_ENG Revision 1.000 Page 28 of 41
Figure 7: “ Process Data ” section
The “Process Data” section is used to define the IO-Link process data to link to MQTT side (Fig. 7).
The meanings of the fields are:
In the field “ Id ” the Id of the IO-Link process data is defined;
In the field “ SubIndex ” the subindex of the IO-Link process data is defined;
In the field “ Name ” the name of the IO-Link process data is defined;
In the field “ Type ” the data format of the IO-Link process data is defined;
In the field “ Length ” the bit length of the IO-Link process data is defined;
In the field “ Gradient ” the multiplication factor of the IO-Link process data is defined;
In the field “ Offset ” the offset of the IO-Link process data is defined;
In the field “ Position ” the starting byte of the internal memory arrays where mapping/getting the value is defined;
In the field “ Start Bit ” the starting bit of the byte of the field “Position” is defined.