ADF Web HD67806-KNX-B2, User Manual

Page: 17 / 25

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual EtherNet/IP Master / KNX - Converter
Document code: MN67806_ENG Revision 1.000 Page 17 of 25
Figure 4: “Set EtherNet/IP Slaves Access” window
ETHERNET/IP ACCESS:
By Pressing the “ EtherNet/IP Access ” button from the main window for SW67806 (Fig. 2) the window “Set EtherNet/IP Slaves Access”
appears (Fig. 4).
This section is used to define the list of the EtherNet/IP slaves to read/write from KNX side.
The means of the fields are:
If the field “ Enable ” is checked, the polling to the EtherNet/IP slave is enabled;
In the field “ IP Address ” the IP Address of the EtherNet/IP slave is defined;
In the field “ Start Input ” the starting Input byte of the EtherNet/IP slave to map on internal memory array is defined;
In the field “ Num Input ” the number of consecutive Input byte to map on internal memory array is defined;
In the field “ Start Output ” the starting Output byte of the EtherNet/IP slave to write from internal memory array is defined;
In the field “ Num Output ” the number of consecutive Output byte to write from internal memory array is defined;
In the field “ Time Poll ” the polling time in ms is defined;
In the field “ Instance T > O ” the instance of the assembly for the Target to Originator data direction is defined;
In the field “ Conn. Point T > O ” the connection point of the assembly for the Target to Originator data direction is defined;
In the field “ Instance O > T ” the instance of the assembly for the Originator to Target data direction is defined;
In the field “ Conn. Point O > T ” the connection point of the assembly for the Originator to Target data direction is defined;
In the field “ Mnemonic ” a brief description is defined.