Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
Modbus / CAN - Datalogger
Document code: MN67324_ENG Revision 1.200 Page 34 of 44
DATE & TIME SETTING:
By pressing the “
Date & Time Setting
” button it is possible
to update/read the Data Logger data/time and having others
informations.
After selecting the correct COM port where the Data Logger is
connected to the PC (or the IP Address for the Ethernet
version), by pressing the “
Set Custom Date & Time
” it is
possible to set the data/time that is written in the fields
upper; by pressing the “
Set PC Date & Time
” button the
data set are the ones of the PC.
By pressing the “
Read Status Device
” are read some
information about the Data Logger:
“
Data Time
”: current data and time of the Data
Logger;
“
Firmware Version
”: firmware version of the Data
Logger;
“
Saved
Event
”: number of Modbus events and some
other commands saved;
“
Used Memory
”: number of bytes used by the Data
Logger for storing data.
Figure 12: “Date & Time Setting” window
