ADF Web HD67084-B2-169MHz, User Manual

Page: 15 / 22

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual M-Bus Wireless / Ethernet
Document code: MN67084_ENG Revision 1.100 Page 15 of 22
wM-BUS ACCESS
By pressing the “
wM-Bus Access ” button from the main window for SW67084 (Fig. 2) the “wM-Bus Access” window appears (Fig. 4).
The data of the columns have the following meanings:
If the field “ Enable ” is checked, the data for the wM-Bus node will be sent on Ethernet;
In the field “ Manufacturer ID ”, the Manufacturer ID of the wM-Bus node is defined;
In the field “ Address ”, the ID of the wM-Bus node is defined;
In the field “ Version ”, the version of the wM-Bus node is defined;
In the field “ Device Type ”, the type of the wM-Bus node is defined;
In the fields “ Key ”, the key to encode the message of the wM-Bus node is defined. These fields must be defined only if the wM-Bus
node uses encrypted communication;
The field “ Key En ” must be checked if the wM-Bus node uses encrypted communication;
In the field “ Mnemonic ”, a brief description is defined.
Figure 4: “wM-Bus Access” window