To find out more abut your product, consult the online EPREL database. As defined in Commission
Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration appliance is available
on the EPREL Base (European Product Database for energy labeling). This database enables you to
consult the information and technical documentation of your refrigeration appliance. You can access the
EPREL Database by scanning the QR code on the energy label of your appliance or by going directly to
www.ec.europa.eu and searching the reference of your refrigeration appliance.
2.
INSTALLATION INSTRUCTIONS
Before using your wine cooler:
•
Remove inner and outer packaging.
•Before connecting the appliance to the electrical socket, leave it in position for 24 hours. This will
reduce the possibility of malfunction of the refrigeration circuit due to transport.
•Clean the inside using a soft cloth and lukewarm water.
Using your wine cooler:
This appliance is designed to operate in ambient temperatures specified by its temperature class marked
on the rating plate.
The ambient temperature affects the interior temperature and humidity for your wine cooler. For optimal
operation, the settings of your wine cooler are carried out for ambient temperature of 23°C to 25°C.
Climate class
Symbol
Ambient temperature range
Extended temperate
SN
From +10°C to +32°C
Temperate
N
From +16°C to +32°C
Subtropical
ST
From +16°C to +38°C
Tropical
T
From +16°C to +43°C
SN: This refrigerating appliance is intended to be used at ambient temperatures ranging from 10°C to 32°C
N: This refrigerating appliance is intended to be used at ambient temperatures ranging from 16°C to 32°C
ST: This refrigerating appliance is intended to be used at ambient temperatures ranging from 16°C to 38°C
T: This refrigerating appliance is intended to be used at ambient temperatures ranging from 16°C to 43°C
Installing your wine cooler:
• This wine cellar is designed for free-standing installation.
• Position it in a place with sufficient strength to support its weight when loaded. To ensure that it is
level,adjust the height of the feet underneath.
• To get the best from your appliance with the lowest energy consumption, do not place the appliance
close to a heat source (heater, cooker, etc.), do not expose it to direct sunlight, and do not place it in a
room which is too cold.
• Connect the appliance to a single socket, leaving a 50 mm gap between the back of the cellar and the
side wall. Be careful to support it, so that your wine cooler is perfectly level. This will prevent any
movement due to instability, generating noise and vibration, and will ensure that the door seals perfectly.
