Adeunis RF SIGFOX SENSORS, User Manual

Page: 30 / 45

SIGFOX SENSORS - Mode d’emploi / User guide version V2.1.1
30 Page of 45
GB
1. PRODUCT PRESENTATION
IMPORTANT NOTE
: the SIGFOX SENSORS can only be started or restarted using a magnet.
Description
• ADEUNIS ’s SIGFOX SENSORS is a ready-to-use radio transmitter enabling any type of 0-10 V, 4-20 mA or On-Off sensor to be transformed
into a wireless sensor.
• This product fulfils the needs of users who wish to remotely supervise all sorts of data (temperature, pressure, level, humidity, CO2, speed,
luminosity, opening, etc.).
• Two sensors may be controlled by a single Adeunis SIGFOX SENSORS transmitter thus permitting a significant reduction in implementation
and deployment costs.
• This document contains essential recommendations for the optimal implementation of ADEUNIS ’s SIGFOX products. Following these
recommendations will enable you to obtain communication over the distances advertised by the manufacturer according to the model
chosen.
• SIGFOX SENSORS transmitters use a Lithium battery guaranteeing a product life in excess of 10 years under normal conditions of use.
IMPORTANT NOTE
: The SIGFOX SENSORS is delivered with an ID+PAC SIGFOX information, allowing the user to visualize its product on the
SIGFOW Network provided that the user a signed a network access contract with SIGFOX or SNOs.
Package composition
The product is supplied in a cardboard package containing the following elements:
• Upper case, electronic board, case plate.
• Compression gland with nut, 3 compression seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs.
1.1. General description
Antenna
2 channels for
clamping collars
DIN-Rail unlocking
lever
4 holes for fixing
screws
Cable outlet
compression
gland
Case plate
Case plate details