EN
WMBus Smart Building MOTION - Guide utilisateur / User guide version V1.0.0
76
Page
of 82
FR
5.5. Correct positioning of the device
Position: To the extent possible, install the transmitter at a min-
imum height of 1.50 m in a non-enclosed area. Do not position
the sensor in front of a window or in the sun.
This device has been designed for indoor use.
CAUTION: the upper face of the device (allowing the opening
of the casing) must be accessible with a screwdriver. Do not
position the device against a ceiling or under an object only to
find that you are no longer able to open the casing.
1.50 m
5.6. Fixing with screws
The product is delivered with 2 CBLZ 2.2 x 19 mm screws and 2 SX4 wall plugs. Use these products or equivalent products in order to fasten
your device onto a flat support.
5.7. Starting up the device using the button
Once the device has been configured, it is ready to be started up. To start the device: press the button for 5 seconds (see diagram), the green
LED lights up and flashes quickly.
Once the device has been validated, it sends its status frames and then, after the defined transmission period time, a data frame.