EN
WMBus Smart Building MOTION - Guide utilisateur / User guide version V1.0.0
53
Page
of 82
FR
Procedure to follow to program its registers according to the chosen mode.
Which mode do I want my device in?
Periodic
Periodic
+
Alarm
Alarm on
exceeding
threshold
What period do I want between each reading?
A reading every X
seconds
A reading every X
seconds
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
I divide the X value
by 2 and I indicate it
in the
S321 register
I divide the X value
by 2 and I indicate it
in the
S321 register
I save each reading
I indicate 1 in my S320
register
When will my frame be sent?
I want to scan regularly
for my alarm but I need
to save the information
every Y time
When do I save the information?
I indicate the Y value in
my S320 register
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number of
readings that I want in
my frame in my register
S301 (79 being the
maximum possible in
WMBus without losing
data)
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number of
readings that I want in
my frame in my register
S301 (79 being the
maximum possible in
WMBus without losing
data
My frame is sent
when my threshold is
exceeded
I indicate 0 in my S301
register to disable the
periodic mode
I set my thresholds
S330 to S334 for
temperature and S340
to S344 for humidity
Set my thresholds S330
to S334 for temperature
and S340 to S344 for
humidity
