A
RF45
User Guide
Ref. 09-08-V0-smn
p 7
+
DC
Supply
PWR
WLAN
ACT
-
CTS
+
RTS RX
TX
5 7 2 3 8
SUB-D 9
PC
(DTE)
Modem
(DCE)
Functionnality
ARF 45 WIFI modem allows data transfer from a serial link over a WIFI
network to an access point. The WIFI modem can be seen as a R232/WIFI
gateway.
Set-up Mode
The modem set-up mode can be entered using a terminal software. This is
the only way to configure the modem.
Accessing modem set-up by serial port
The modem setup can be reached with any terminal configured with the
following settings: 9600 baud, 8 bits, no parity, 1 stop bit, no flow control
and no local echo.
Then, reset the modem by cycling the unit’s power (turning the power off
and back on). Immediately upon resetting the modem, enter three lowercase
x
characters (
xxx
).
The three xxx characters must be entered within three seconds after
resetting the modem.
Summary of Contents for ARF45
Page 1: ...Wifi Modem User Guide ...
