A
RF45
User Guide
Ref. 09-08-V0-smn
p 19
The Encryption prompt requests the length of the encryption key and the
security strength. WEP64 uses a 40 bits/5 bytes (option 0). WEP128 uses a
104bits/13 bytes key (option 1).
Select (Y) yes at the display current key prompt to show the currently
configured key/passphrase.
Change key permits modifying the currently configured key by selecting (Y)
Yes.
The key type requests whether the new key is in hexadecimal or passphrase
format.
Enter key prompts for the new encryption key. The passphrase input is not
the same as ASCII input. ASCII is directly translated into hexadecimal bytes
according to the ASCII table. The passphrase is hashed using specific
algorithms.
The passphrase input is safer because it up to 63 chars long. ASCII input is
a maximum of 5 (WEP64) or 13 (WEP128) characters long and limits the
number of combinations.
The TX Key index selects the WEP key used for transmissions. Enter a value
from 1
to 4.
WPA
Only Pre-Shared Keys (PSK) are available for authentication.
Security 0=none, 1=WEP, 2=WPA, 3=WPA2/802.11i (1) ? 2
Group encryption 1=WEP64, 2=WEP128, 3=TKIP (0) ? 3
Display current key (N) ? Y
12345
Change Key (N) ? Y
Key type 0=hex, 1=passphrase (1) ? 0
Enter Key:
Encryption: 0=TKIP, 1=TKIP+WEP (1) ?
Summary of Contents for ARF45
Page 1: ...Wifi Modem User Guide ...
