A
RF45
User Guide
Ref. 09-08-V0-smn
p 20
Set the group encryption type to 1 (WEP), 2 (WPA) or 3 (WPA2). The group
encryption for all wireless devices communicating with the same access point
must be equal to receive broadcast and multicast messages. If any of these
devices are WEP only (no support for WPA) set the group encryption to WEP
for all devices.
Select (Y) yes at the display current key prompt to show the currently
configured key/passphrase.
Change key permits modifying the currently configured key by selecting (Y)
Yes.
The key type requests whether the new key is in hexadecimal or passphrase
format.
Enter key prompts for the new encryption key. The passphrase input is not
the same as ASCII input. ASCII is directly translated into hexadecimal bytes
according to the ASCII table. The passphrase is hashed using specific
algorithms.
Set the Encryption type to the minimum required security level. The “+”
sign
indicates that the group (broadcast) encryption method is different from the
pairwise
(unicast) encryption (i.e. WEP and TKIP).
WPA2 / 802.11i
Only Pre-Shared Keys (PSK) are available for authentication. The
WPA2/802.11i mode is compliant with the Robust Secure Network that is
specified in the IEEE standard 802.11i. It enables the AES-based strong
CCMP encryption.
Security suite: 0=none, 1=WEP, 2=WPA, 3=WPA2/802.11i (2) ? 3
Display current key (N) ? Y
AD 76 08 97 46 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Change Key (N) ? Y
Key type 0=hex, 1=passphrase (0) ? 1
Summary of Contents for ARF45
Page 1: ...Wifi Modem User Guide ...
