AMR SENSORS- Mode d’emploi / User guide version V1.2
33
Page
of 41
•
Clip the electronic board onto the casing’s base. Make sure that the fastening clip is properly locked into the board’s fitting.
Fastening clip
Fitting
•
Insert the upper part of the casing. Inside this part there are guide rails for the board. Make sure that the board is properly positioned
within these guides.
•
Once the board is in position, lower the upper cover and lock it onto the casing’s base. Strong pressure will enable both parts to be clipped
together and will enable protection level IP67 to be ensured.
Locking clips for the
upper casing
