AMR SENSORS- Mode d’emploi / User guide version V1.2
27
Page
of 41
1. Introduction to the Wireless M-Bus AMR range
The Adeunis RF radio frequency M-Bus AMR (Automatic Meter Reading) range (radio transmitters, repeaters, and receivers) allows you to create
an independent ecosystem to ensure the emission, transmission and collection of data in Wireless M-Bus format.
The Adeunis RF AMR solution is fully compatible with the Wireless M-Bus standard (EN 13757-3 and EN 13757-4) and ties in perfectly with the
philosophy of this open standard where all the information required for decoding the frames is featured in the frame header.
2. AMR Sensors
NB:
Starting or restarting the AMR Sensors unit can only be done with a magnet.
Description
•
The Adeunis RF radio frequency AMR Sensors unit is a ready-to-use radio transmitter enabling any type of 0-10 V, 4-20 mA or On-Off
sensor to be transformed into a wireless sensor.
•
This product fulfils the needs of users who wish to remotely supervise all sorts of data (temperature, pressure, level, humidity, CO2, speed,
luminosity, opening, etc.).
•
Using the Wireless M-Bus protocol enables the AMR Sensor to be integrated into any network already deployed or enables its own ecosys-
tem to be created based on products in the Adeunis RF wireless AMR range.
•
Two sensors can be handled by a single AMR Sensors transmitter.
•
The user can configure the transmitter via mechanical switches or via radio, enabling you to choose between transmission modes, the
intervals, or data encryption.
NB
: AMR Sensors enables you to transmit measurements from sensors but does not power them (except for the On-Off version)
Composition of the package
The product is delivered in a cardboard package containing the following items:
•
The upper casing, the electronic board, and the casing base.
•
The packing gland nut,3 packing gland seals, 2 CBLZ 2.2 x 19 mm screws, and 2 Fischer SX4 wall plugs.
2.1. General description
107
90
27
49,50
Antenna
2 holes for
passing collars
through
Rail-DIN unlocking
lever
4 fastening holes
Cables outlet
packing gland
Casing base
Casing base detail
