11
FL-Cool-200629-Rev003-UM-en
Presetting the cooling value
To preset a fixed cooling value, briefly press the “SET” button. The LED
flashes and the current
preset cooling temperature is displayed. Press or button within 15 seconds to change the
cooling value. After you have selected your desired cooling temperature, briefly press the “SET”
button again. The LED
stops flashing and the currently reached cooling temperature is
displayed.
To exit the temperature setting without saving the modified cooling temperature, briefly press the
On/Off button.
Patty maker operation
The meat mincer with cooling is suitable to produce patties (“hamburgers”) of different sizes and
weights in a semi-automatic way using the patty maker attachment.
Mounting the patty maker attachment
Mount the patty maker attachment before the ejection of the worm housing.
To do this, pull out the latch on the top of the patty maker attachment and position the attachment in
front of the device so that the guide pin is inserted into the guide holder and the lower holder engages
around the hand wheel.
Then release the latch so that the snap mechanism on the upper side also engages around the hand
wheel.
Check the patty maker for a firm fit.
Operating the patty maker attachment
For approximated values note 100 g, 130 g, 155 g und 170 g, whereby these weights could differ
because of different influences like processed meat, temperature of the meat, quantity in filler neck
and worm, part of water or ice etc. Deviations up to 10-15% are possible.
The adjustment is made using the lever on the patty maker attachment (2). When the lever is
positioned in the left outer notch, the largest possible patties are produced. Similarly, a preset in the
right outer notch means positioning for the smallest patties.
First close the compartment of the attachment by pushing it to the left until it stops.
Now turn the programme selector (1) to the right (
). This activates the patty mode. In this mode,
the worm automatically starts to turn counter-clockwise and transports the meat into the patty maker
attachment.
As soon as the compartment in the attachment is filled in the preset size, the device switches off
automatically.
2: Lever for presetting the
patty size
1: Programme selector
Patty maker attachment
