background image

Chapter 1

 

Preface 

 
This is a Preliminary version of the manual intended to provide advance 
information on the Addonics Technologies’ external DVD DigiCopier 
drive. The information is as complete and as accurate as possible as of 
the publication date, but will be superseded and updated periodically by 
revised manuals. The contents are subject to change without notice.

 

 

General Information 

 
The Addonics Technologies’ DVD DigiCopier drive is a drive that is 
designed to operate as a stand-alone unit and/or for PC and Laptop with 
Firewire, PCMCIA, Serial ATA and USB Port. 
 

Features 

 

Fast one to one DVD/CD Duplicator  

• 
• 
• 
• 
• 

• 
• 
• 

• 

• 
• 

Auto duplication and easy operation with no push buttons  
Auto source DVD and blank CD detection  
Automatic Format detection  
Auto detect DVD±R, DVD±RW, CD-R and CDRW media to perform 
at the maximum speed of the media  
Firmware upgradeable via the build in DVD Reader 
Small foot print 
Can be used as an External DVD±R/RW for PC or Notebook 
computers.  
Connects to USB, Firewire port or PCMCIA port (by attaching 
different Addonics interface cables.)  
Supports buffer underrun  
Includes DVD/CD Mastering software for Windows 98SE, ME, NT, 
2000, XP 

 

Addonics Technologies – 

DVD±R/RW 

DigiCopier Users Guide v1.0 

3

Summary of Contents for DVD DigiCopier


















Reviews: