Addictive audio 100.1D, Installation Manual & Owner'S Manual

Page: 26 / 32

26
ICK Adjusting)
This controls the high pass crossover point for the speaker outputs. This
crossover, when selected, will attenuate the frequencies below the
crossover point with a slope of -12dB per octave The crossover point is
adjustable from 50-500Hz. This filter reduces unwanted lower frequencies
from being played through the speaker(s).
4. Bass Boost
This allows the ability to Boost low frequency response
(45Hz)
up to +18dB.
5. Low Pass Filter with EASY CLICK
(Refer to Pg.13 for EASY CLICK Adjusting)
This controls the low pass crossover point for the speaker outputs. This
crossover, when selected, will attenuate the frequencies above the
crossover point with a slope of -12dB per octave The crossover point is
adjustable from 50-150Hz. This filter reduces unwanted upper frequencies
from being played through the subwoofer(s).
6. Subsonic Filter with EASY CLICK
(Refer to Pg.13 for EASY CLICK Adjusting)
Control the high pass crossover point for the speaker outputs to eliminate
ultra low frequencies. This crossover is always on with a -12dB per octave
slope and adjustable from 25-40Hz. This filter is used mainly in ported
applications, to protect the subwoofers from excessive excursion below
the port tuned frequency. Not necessary when dealing with sealed
enclosures, but can still be used to help protect the subwoofer system.
Input Gain Level Control *NOT A VOLUME KNOB*
gain of both channels to match the
3. High Pass Filter with EASY CLICK
(Refer to Pg.13 for EASY CL
7.
This allows for the adjustment of the
output level of the source unit. In addition, it allows adjustment from 0.2V
to 6.0V.
8. RCA Line Input Jacks
. RCA Line Jacks
gnal to pass through to another amplifier via an RCA cable..
Input signal from source unit through RCA cable.
Output 9
Allows si