Addictive audio 100.1D, Installation Manual & Owner'S Manual

Page: 25 / 32

25
Features and Controls 25.1 / 20.2 / 5.4 / 10.4 (Fig.4)
1. 0-180 Degree Phase Alignment
Allows for the time correction of music signals to prevent phasing
cancellation or music blurring.
2. MODE
HPF: Set the MODE SWITCH to the HPF position when the amplifier is used to drive a
tweeter/midrange system. The frequencies below the crossover point will be
attenuated at -12dB/octave slope. Adjust the crossover frequency by rotating the
HPF knob to the desired frequency ranging from 50-500Hz. See #3 below for more
details.
LPF: Set the MODE SWITCH to the LPF position when the amplifier is used to drive a
subwoofer system. The frequencies above the crossover point will be attenuated
at -12dB/octave. Adjust the crossover frequency by rotating the LPF knob to the
desired frequency ranging from 50-150Hz. See #5 below for more details.
FULL: Set the MODE SWITCH to the FULL position when the amplifier is used to drive full-
range speakers and/or components that come with their own crossover. The full
frequency bandwidth will be output to the speakers without high or low frequency
attenuation.