APCI-7xxx-3
Figures and Tables
33
Fig. 6-4: Setting example: MXTTY current loop: Input clock
F9F
∗
F
Input clock
:
Under ”Crystal frequency“ the frequency of the integrated quartz oscillator of the
board is indicated. The standard PC quartz crystal frequency is 1.8432 MHz, so
that the max. baud rate that can be set is 115200.
6.2
Board test
You can test if you board is not correctly installed with a shorting plug and the
test software MTTTY.
The setup file for the test software MTTTY is supplied on the CD-ROM under
CD/MMTTY. The program is described in chapter
X198H
7.7.3
X
.
∗
The example shows the settings under Windows 2000
Summary of Contents for APCI-7300-3
