Solutions for industrial automation and measurement
___________________________________________________________________________________________________
Please observe that during the migration to RoHS-compliant boards, the pin assignment of RS232
changed. Thus, there are differences between the different revision numbers of the printed circuit board.
Therefore please check your revision number.
Thank you for your attention!
Board
Revision number
Latest technical description
Rev. A-C
See Rev. D, but with changed modem control signals
DCD & DSR at RS232 modules.
APCI-7300-3
,
APCI-7420-3
,
APCI-7500-3
,
from Rev. D
Internet:
Manual download
Edition: 02.03 – 03/2007-b (and later editions)
Rev. A-B
See Rev. C, but with changed modem control signals
DCD & DSR at RS232 modules.
APCI-7800-3
from Rev. C
Internet:
Manual download
Edition: 02.03 – 03/2007-b (and later editions)
9-pin SUB-D connector pin assignment with
changed modem control signals DCD & DSR.
APCI-7300-3
,
-7420-3
,
-7500-3
: Rev.
A
-
C
APCI-7800-3
: Rev.
A
-
B
Standard 9-pin SUB-D connector pin assignment
APCI-7300-3
,
-7420-3
,
-7500-3
: from Rev.
D
APCI-7800-3
: from Rev.
C
Pin-No. Signal Pin-No. Signal
1
DSR
1
DCD
2 RXD
2 RXD
3 TXD
3 TXD
4 DTR
4 DTR
5 GND
5 GND
6
DCD
6
DSR
7 RTS
7 RTS
8 CTS
8 CTS
9 RI 9 RI
ADDI-DATA GmbH • Dieselstr. 3 • D-77833 Ottersweier • Phone: +49 7223 9493-0 • Fax: +49 7223 9493-92
E-mail:
• Internet:
www.addi-data.com
Summary of Contents for APCI-7300-3
