33
FUR
THER
INFORMA
TION
Software and System Operations
This page contains various indications and options related to the internal
software of the unit.
Note: The highlighted (and colored) entry is the version of software currently
running.
Preferred Software Version
- The software version the device will
boot into upon a reboot.
Recovery Software Version
- The software version the device will
boot into if placed into recovery mode.
Alternate Software Version
- The other (backup) version of software
the device has available.
Reboot Device
- Click the Reboot button to Reboot the device.
Restore Default Settings
- Click the Restore button to restore the
device to factory default settings.
Switch Software Versions
- Click to switch to the listed ‘Alternative
Software Version’.
Upgrade Device
- Allows you to upgrade the firmware either from
a trusted URL or from a locally stored file. Use the field to define the
source and then click the Upgrade button.
TX - System
To get here
You can access this page in two ways:
1 On the console keyboard attached to the RX unit, access
the OSD by pressing
CTRL + ALT + C
.
2 Click on the
Transmitters
option.
3 Click the
System
link.
OR
1 Connect a computer to the same network as the TX unit.
2 Run a web browser and enter the IP address of the TX
unit:
http://169.254.1.33
(this is the default address when
using SFP port 3). If you are using SFP port 4 then the
default address will be
http://169.254.1.43
If the IP address is unknown, press the small button on the
front panel next to the OLED screen to reveal the value
for
IP Address 3
(or IP Address 4)
and use that address.
3 Click the
System
link.