Adcon A850, User Manual

Page: 108 / 366

CHAPTER 3
Configuring the Gateway
108
• Job scheduling - allows to define a time schedule (“Mode”) to
which time the A850 has to perform a SSH tunneling;
• Job status - for information at which time the last SSH
tunneling has been performed and with which success, as well
as at which time the next SSH tunnelling is planned;
• Job dependent settings - allow to arrange that a message will
be forwarded to the address entered in the tree window
“Notification Sending” in case of successful SSH tunneling;
• Primary Server - allows to assess the access data for the
primary SSH tunnel server;
• Secondary Server - allows to assess the access data for the
secondary SSH tunnel server.
Job scheduling
Figure 102. SSH Tunnel - Job scheduling
Within “Job scheduling”, the pull down menu “Mode” provides
the following set-ups to start a SSH tunneling:
Note: The job scheduling layed down can be oversteered by the
commands ”Start Job” or “Stop Job” according to Fig. 43
or 46, respectively.