7351 Series Digital Multimeter Operation Manual
4.1.1 Front Panel Description
4-2
4.1.1.1
Display Section
Figure 4-2 Display Section Description
4.1.1.2
Power Switch
1. POWER switch
Pressing the power switch turns on the power and the power is
supplied to this instrument.
Re-pressing the power switch turns off the power and the power
is shut down.
4.1.1.3
Measurement Function Keys
1. DCV
Selects the DC voltage measurement (DCV).
2. ACV
Selects the AC voltage measurement (ACV).
3.
Selects the resistance measurement (2W
) in which the two-wire
method is used.
4. DCI
Selects the DC current measurement (DCI).
5. ACI
Selects the AC current measurement (ACI).
6. FREQ
Selects the frequency measurement (FREQ)
7. AC + DC (SHIFT + ACV)
Selects the AC+DC coupling or AC coupling in the AC voltage
measurement.
8. LP-
(SHIFT +
Selects the low power resistance measurement.
9.
(SHIFT + DCI)
Selects the diode measurement (
).
Remote control
GPIB address (My Address)
Sampling hold
Sampling rate setting
F:
Fast
M: Medium
S:
Slow
Buzzer indicator
Sampling indicator
Calibration
mode
Calculation settings
Auto-range
Function settings
Numerical value display section
Auto-zero
setting
Error queue
Unit display section
RCL:Recall setting from
internal memory
ST: Store setting into
internal memory
