6240B DC Voltage Current Source/Monitor Operation Manual
2.2.9 Low-Resistance Measurement
2-53
Setting the low-resistance measurement pulse source mode
3. Press
MODE
. Rotate
or press
or
to select
PLS-RM
, and press
ENTER
.
The PLS indicator and the m
indicator go ON, showing the low-resistance
measurement pulse source mode has been set.
Setting the pulse source value
4. Press
123...
,
1
,
0
,
UNIT
and
ENTER
in order.
The pulse source value is set to 10 mA.
Setting the current limit value
5. Press
123...
,
3
,
0
,
0
,
UNIT
and
ENTER
in order.
The voltage limit value is set to
300 mV.
6. Press
LIMIT
.
The HOME screen is displayed.
Setting the 4-wire connection
7. Press
4W/2W
. The 4W indicator goes ON, showing that the 4-wire connection
has been set.
Setting the pulse time
8. Press
MENU
.
9. Press
or
to
select
D) TIME
. Press
to enter the Select level.
10. Press
twice to select
3) Meas Delay
. press
to enter the Input/Run level.
11. Press
123...
,
5
and
ENTER
in order.
The measurement delay time is set to 5 ms.