System Configuration
LTPE-UG-1017-01 Issue 1
22
February 15, 2001
UTU-731 List 1 and UTU-732 List 1
Config Menu Options
Press
at the console screen to display the Config menu (
).
below lists the Config menu options and the suggested order of system
configuration.
Figure 9.
Console Screen Config Menu
Table 7.
Config Menu Options and Order of System Configuration
Use this Option
To:
See page:
Terminal Settings
Select the best viewing mode for the console screen.
Date and Time
Set the system date and time.
Password
Set or change the system password.
Circuit ID
Assign a circuit ID.
System Settings
Select and configure system-wide operating
parameters.
LTU and NTU
Interface
Select and configure LTU/NTU-specific operating
parameters.
Alarms
Enable or disable alarms and select alarm severity.
Set to Factory Dflts
Reset all operating parameters to factory settings.
C
