ADC 150-1425-31, User Manual

Page: 48 / 88

System Configuration LTPE-UG-1017-01 Issue 1
38 February 15, 2001 UTU-731 List 1 and UTU-732 List 1
Set to Factory Defaults
Set to Factory Dflts is the screen from which all operating options can be reset
to the ADC factory defaults.
1 Press at the Config drop-down menu to display the Set to Factory Dflts
screen ( Figure 21 below).
Figure 21. Set to Factory Dflts Screen
2 Press to reset the UTU configuration to factory defaults. A
confirmation message appears at the bottom of the display:
SETTING FACTORY DEFAULTS
...
SERVICE *WILL* BE
INTERRUPTED! ARE YOU SURE(Y/N)?
F
ENTER