LTPE-UG-1017-01 Issue 1
System Configuration
UTU-731 List 1 and UTU-732 List 1
February 15, 2001
33
Configure Alarms
Use the Config Alarms menu to configure LTU and NTU Interface alarm
parameters and the HDSL span alarm parameters. When setting alarm
parameters for LTUs and NTUs, keep the following rules in mind:
•
Minor alarms cause LED indications and are stored in history. Console
screen menu alarm history reports are generated.
•
Major alarms cause LED indications, actuate the line unit alarm relay,
and are stored in history. Console screen menu alarm history reports are
generated.
•
The LTU alarm relay activates in response to a major alarm at the LTU
only.
•
The NTU alarm relay activates in response to a major alarm at the NTU
only.
Press
at the Config drop-down menu to display the UTU-731 or UTU-732
Config Alarms menu (
Figure 17.
Config Alarms Menu
A