www.adblighting.com
Quick Start - page 50
Issue 1.0
To switch to a Crossfade mode, go to the column Mode, double-click on Hard and select
{Soft}
, in this mode Fade Time will be used as set in the Wizard and if « Set Times » was
checked.
To switch between different modes:
Normal: go to the column Direction, double-click on XXXX (Current mode) and select
{Normal}
Bounce: go to the column Direction, double-click on XXXX (Current mode) and select
{Bounce}
Reverse: go to the column Direction, double-click on XXXX (Current mode) and select
{Reverse}
Random: go to the column Direction, double-click on XXXX (Current mode) and select
{Random}
Build mode: go to the column Build, tick the box.
To determine a count: go to the column Loops, click on the cell,
[ENTER]
, tap a number
then
[ENTER]
. A new column will appear where you can choose the action at the end of
the count, between OFF or ON.
Note
: In Hard mode you can set a BPM value: go to the column BPM, click on the cell,
[ENTER]
, tap a number then
[ENTER]
.
10.2.2.2 TIMES
To Edit Times for one Step:
go to the column In/Out (other choices are In, Out and Stay) with the
[DOWN]
key then
the other navigation keys,
[ENTER]
, tap a value then
[ENTER]
.
To Edit Times for a range of Steps:
go to the column In/Out (other choices are In, Out and Stay) on the line corresponding to
the first step, with the
[DOWN]
key, then use the other navigation keys,
hold the shift key on the keyboard, use the
[DOWN]
key to select the next steps
tap a value then
[ENTER]
.
10.2.2.3
CHANGING INTENSITY LEVELS
To Edit channel level for one Step:
go to the column corresponding to the channel and on the line corresponding to the step
to edit with the
[DOWN]
key then the other navigation keys
tap new level then
[ENTER]
.
To Edit channel level for a range of Steps:
go to the column corresponding to the channel and on the line corresponding to the first
step to edit with the
[DOWN]
key then the other navigation keys
hold the shift key on the keyboard, use the
[DOWN]
key to select the next steps,
tap new level then
[ENTER]
.
10.3 Loading a Chaser in a Subfader
To Load a Chaser in a Subfader:
[#] [CHASER]&[ASSIGN Key]
Note
: to use the next boarding Subfader as Speedmaster: go in the Subfader Screen
[SubFaders]
, Right click on the number area, select
{As Speedmaster for
chaser in Field #}.
