www.adblighting.com
Quick Start - page 49
Issue 1.0
Note
: to use the next boarding Subfader as Speedmaster: go in the Subfader Screen
[SubFaders]
,
Right click on the number area, select
{As Speed master for
chaser in Field #}.
10.2.1.2 CHANNELS
SELECTED
E .g. Channels 1 thru 4 are selected with 70% as level
To Record a Chaser with the next free number (for a specific number, just add
[#]
before):
[CHASER] & [Assign Key]
and raise the Subfader at 100%.
10.2.2
Changing modes and editing Times and levels in the EDITOR window
10.2.2.1 MODES
By default the Chaser is in Hard mode, which means only the Stay Times will be used as
set in the Wizard and if « Set Times » was checked.
1.
Click on the
Pause
virtual button
2.
Click on the Step
1
3.
Select Channel(s) ant set level(s)
Note: [#] & [LOOK] will load the Look #
directly
4. Press
[UPDATE]
to store the Step
1
5.
Go to Step
2
with the
[Down]
key
6.
Repeat 1 to 4
7.
Go to Step
3
with the
[Down]
key
8.
Repeat 1 to 4
9.
Go to Step
4
with the
[Down]
key
10. Repeat 1 to 4
11.
[ESC]
close the Editor window (changes will
be stored automatically). A popup appears,
{YES}
will
start the Chaser
.
•
Enter the Name of the Chaser
•
In the Channels selected area:
the number of Steps
depends on the
number of channels selected. You can change it.
•
Pr. Step: quantity of channels by Step, by default set in 1.
Note
: setting 2 Channels by Step will create 4 Steps, Step 1 with Channel
1 and 2, Step 2 with Channel 3 and 4, Steps 3 and 4 will be exactly
the same as 1 and 2.
•
Levels : Full or levels on stage
•
Tick the Set Times box to set times, enter the Stay and the Fade
Times.
•
The Open Editor on Accept option is checked by default.
If Unchecked, the editor won’t open automatically.
•
Click on the checkmark virtual button to validate:
the EDITOR window appears.
•
Click on the
Pause
virtual button
•
Use navigation keys
[Up] and [Down]
to move from step to step
•
If the result don’t suit to you, use the above method to Edit Steps.
•
[ESC]
close the Editor window (changes will be stored automatically).
A popup appears,
{YES}
will
start the Chaser
