5.0 Installation
Warning
Allow only qualified personnel to perform the following tasks. Observe and follow the safety instructions in this
document and all other related documentation.
This section provides instructions for installing the L-810 obstruction lights. Refer to the airport project plans and
specifications for the specific installation instructions.
5.1 Unpacking
The equipment is shipped ready for installation. Handle equipment very carefully to prevent component damage. Unpack the
carton upon receipt and check the contents and their condition. Note any exterior damage to the carton that might lead to
detection of equipment damage.
If you note any damage to any equipment, file a claim with the carrier immediately. The carrier may need to inspect the
equipment.
5.2 Installation
This subsection provides installation instructions for L-810 obstruction light fixtures.
5.2.1 Placement
The placement and number of L-810 light fixtures required to adequately mark an obstruction for any approaching aircraft is
determined by
•
height, size, and shape of obstruction
•
area in which an obstruction is located
Refer to FAA Advisory Circular 70/7460-1 for more specific information regarding placement of obstruction lights on locations
such as poles, towers, buildings, and smokestacks.
96A0006, Rev. N, 2018/11/01
13
Copyright
©
ADB Safegate, All Rights Reserved
