Advanced Control Equipment ACE
TM
Installation
Instructions
©
2001 ADB Airfield Solutions, LLC
96A0245D
Page 16
All rights reserved
Issued 5/01
Important Note: All conduit and wiring must only enter the
ACE™ enclosure through the bottom access plate. This will
facilitate quick maintenance and replacement of the ACE™
unit.
A
.
Attach all conduit as
required to the bottom
access plate ONLY as seen
in Figure 9.
Siemens Airfield
Solutions
recommends
removing the MAIN
enclosure while drilling
and attaching conduit to the
BOTTOM access plate.
Make sure not to damage
internal electronic
components during
installation of enclosure.
DO NOT blow out
enclosures as metal
shavings can damage the
electronics.
Top
Conduit and Cabling
through bottom access plate only
Figure 9:
Conduit and Cable entry locations
4. Installation Instructions
(contd.)
ACE™ Cable Entry and Wiring:
