Advanced Control Equipment ACE
TM
Installation
Instructions
©
2001 ADB Airfield Solutions, LLC
96A0245D
Page 12
All rights reserved
Issued 5/01
Locate each ACE™ unit as close as possible to each of the
controllable elements (i.e. Regulator, Generator etc.). Exact
locations should be coordinated with the Airport / Engineer.
Each ACE™ must be mounted flush against a wall or on U-rails
that will support all four (4) corners. The unit must be oriented
as seen in
Figure 4.
Top Mounting Holes (Slotted)
Bottom Mounting Holes (Round)
Figure 4: Advanced Control Equipment
4. Installation Instructions
ACE™ Mounting Location:
ACE™ Mounting Orientation:
