background image

Advanced Control Equipment ACE

TM

 Warranties 

 

 

©

 2001 ADB Airfield Solutions, LLC 

96A0245D iv

 

All rights reserved

 

Issued 5/01 

 

 

 

 

Products of Siemens Airfield Solutions manufacture are guaranteed against 
mechanical, electrical, and physical defects (excluding lamps) for a period 
of one year from the date of installation or a maximum of two years from 
the date of shipment and are guaranteed to be merchantable and fit for the 
ordinary purposes for which such products are made.   
 
Siemens Airfield Solutions will correct by repair or replacement, at its 
option, equipment or parts which fail because of mechanical, electrical or 
physical defects, provided that the goods have been properly handled and 
stored prior to installation, properly installed and properly operated after 
installation, and provided further that Buyer gives Siemens Airfield 
Solutions written notice of such defects after delivery of the goods to 
Buyer.   
 
Siemens Airfield Solutions reserves the right to examine goods upon which 
a claim is made. Said goods must be presented in the same condition as 
when the defect therein was discovered. Siemens Airfield Solutions furthers 
reserves the right to require the return of such goods to establish any claim. 
 
Siemens Airfield Solutions’s obligation under this guarantee is limited to 
making repair or replacement within a reasonable time after receipt of such 
written notice and does not include any other costs such as the cost of 
removal of defective part, installation of repaired product, labor or 
consequential damages of any kind, the exclusive remedy being to require 
such new parts to be furnished.   
 
Siemens Airfield Solutions’s liability under no circumstances will exceed 
the contract price of goods claimed to be defective.  Any returns under this 
guarantee are to be on a transportation charges prepaid basis.  For products 
not manufactured by, but sold by Siemens Airfield Solutions, warranty is 
limited to that extended by the original manufacturer. 
 
This is Siemens Airfield Solutions’s sole guarantee and warranty with 
respect to the goods; there are no express warranties or warranties of fitness 
for any particular purpose or any implied warranties of fitness for any 
particular purpose or any implied warranties other than those made 
expressly herein.  All such warranties being expressly disclaimed. 
 
 
This manual could contain technical inaccuracies or typographical errors. 
Siemens Airfield Solutions reserves the right to revise this manual from 
time to time in the contents thereof without obligation of Siemens Airfield 
Solutions to notify any person of such revision or change. 
 
Details and values given in this manual are average values and have been 
compiled with care.  They are not binding, however, and Siemens Airfield 
Solutions disclaims any liability for damages or detriments suffered as a 
result of reliance on the information given herein or the use of products, 
processes or equipment to which this manual refers.  No warranty is made 
that the use of the information or of the products, processes or equipment to 
which this manual refers will not infringe any third party’s patents or rights.  
The information given does not release the buyer from making their own 
experiments and tests. 
 
 

Warranties 

Disclaimers 

Summary of Contents for ACE Series





























Reviews: