ADB Safegate L-858 AGSF Series, User Manual

Page: 23 / 56

See LED sign load chart on DS-3006: AGSF-L for sign loading and optimum sign transformer size. Note that the existing larger
size transformer, if present, can be reused. Ask for Service Bulletin ALN158 for details on how to retrofit the sign.
LED Sign Retrofit Kit
Size
1 = Size 1
2 = Size 2
3 = Size 3
4 = Size 4
5 = Size 5
Number of Modules
1 = 1 module
2 = 2 modules
3 = 3 modules
4 = 4 modules
94A0628 - X X 0
Packaging Data
Signs are shipped with L-823 cord set(s), frangible couplings, and floor flanges – ready for installation.
Description Gross Weight Carton Dimensions
(lb) (kg) (in) (cm)
Size 1, Module 1
Size 1, Module 2
Size 1, Module 3
Size 1, Module 4
46
78
115
169
21
35
52
77
34 × 34 × 13
34 × 63 × 13
34 × 92 × 13
34 × 121 × 13
87 × 86.4 × 33
87 × 160 × 33
87 × 234 × 33
87 × 307 × 33
Size 1, Module 2
Size 2, Module 2
Size 2, Module 3
Size 2, Module 4
71
104
153
220
1
32
47
70
100
1
40 × 40 × 13
40 × 76 × 13
40 × 112 × 13
40 × 147 × 13
102 × 102 × 33
102 × 193 × 33
102 × 285 × 33
102 × 374 × 33
Size 3, Module 1
Size 3, Module 2
Size 3, Module 3
Size 3, Module 4
81
131
199
252
37
60
90
114
46 × 46 × 13
46 × 89 × 13
46 × 131 × 13
46 × 173 × 13
117 × 117 × 33
117 × 226 × 33
117 × 333 × 33
117 × 440 × 33
1
Estimated weight
2.2.2 Optional Equipment
This subsection discusses optional equipment. Optional equipment includes the Lamps-Out Indicator and the On/Off switch.
2.2.2.1 Optional Lamps-Out Indicator (Halogen Signs Only)
The Lamps-Out Indicator (LOI) is an optional component used in conjunction with the Signature Series sign electronics to give
a visual indication that a lamp has failed. This allows airport personnel to quickly find a sign with a failed lamp. The LOI flashes
a small blue LED with a narrow field of view designed for direct viewing only from one side of the sign at eye level or from the
seat of a truck so that pilots are not distracted.
During operation, the Signature Series sign electronics constantly monitors whether a lamp has failed. When a lamp fails, the
sign electronics sends a signal to the LOI indicating that a lamp has failed. After the power is turned on, the LOI immediately
starts charging its capacitors through the sign electronics. When the LOI has reached sufficient charge, the LED mounted on
one side of the sign starts to flash at a rate of once every two seconds, with or without the sign being powered. At full charge
(approximately
6 hours), the LOI flashes, without the sign being powered, for approximately 24 hours. The LOI continues to flash until the
failed lamp has been replaced and the sign power is cycled from off to on.
The LOI LED can be set to one of three intensity levels: Low, Medium, and High. The different levels are intended to cover a
wide range of viewing conditions such as weather, night or day viewing, and distance.
96A0286, Rev. AT, 2020/09/16 13
Copyright
©
ADB Safegate, All Rights Reserved