ADB Safegate L-854, User Manual

Page: 31 / 48

Note
The configuration of SW1 will determine if the 3-click and 5-click relays will also close.
8. Action: Wait approximately 60 seconds.
Result: The 7-click relays should open. The green 10 light will go out.
9. Action: Return the TIMEOUT Switch to your normal setting.
The FAA standard is 15 minutes.
10. Action: Enter the desired operating frequency (if different than shown on display) using the ← (down) and → (up) keys to
the left of the LED frequency display. Press the ENTER button once. After the displays shows VERIFY, press and hold the
ENTER button for five seconds to store the frequency in memory, and move the receiver to the desired frequency.
Result: Unit is now ready for operation.
96A0390, Rev. K, 2019/02/01 25
Copyright
©
ADB Safegate, All Rights Reserved