Page 17/29
Vidar
Installation
Guide
Adaptive Recognition
America
Adaptive Recognition
Hungary
Adaptive Recognition
Nordic
Adaptive Recognition
Singapore
WWW.ADAPTIVERECOGNITION.COM
6.
SOFTWARE REQUIREMENTS
The cameras are developed to operate without any kind of special software.
Software requirements :
•
For network setup, administrator (root) privileges are necessary.
•
Web browser: Mozilla Firefox 52, Google Chrome 51.X.X.X or later editions. If it is possible,
update your browser (Firefox or Chrome) to the newest available version.
7.
ACCESSING THE CAMERA
Steps of accessing the web interface of the camera from a browser:
1.
Connect the camera to a computer or network switch, then power on the camera. After it is
turned on, both status LEDs (red and green on the camera front) are turned on while the
camera is booting. After finished, the green status LED flashes two times while the red one
turns off signaling that the camera is ready for operation.
2.
Enter an alternate IP address (or set your computer’s IP) in the 192.0.2.x subnet –
where x is
an integer number between 1 and 254 except 3
–
with the subnet mask of 255.255.255.0.
3.
For more information, see
Appendix
.
To enable all camera functions, enable JavaScript control in your browser.