4-10
Adaptec Storage Manager Pro User’s Guide
Checking Which System Is the Directory
Manager
If you are not certain which system is the directory manager, you
can check from any system that is part of the management set.
From the Storage Manager Pro Dashboard on any system in the set
do one of the following:
■
From the Normal view, look for the icon
that looks like
three systems. That is the directory manager. (See page 1-13.)
■
From the Detail view, look for a check mark in the Directory
Manager column.
Moving a System from One Management Set to
Another
You can move a system from one management set to another. You
must do this from the system that you want to move.
To move a system from one management set to another:
1
From the Storage Manager Pro Dashboard on the system you
want to move, click
Remote Configuration
.
The Remote Configuration dialog box appears.
2
From the Configuration Task list, select
Register with Another
Directory Manager
.
3
Type the system name or IP address of the directory manager
you want to register with.
4
Click
OK.
Storage Manager Pro unregisters the system from the old
directory manager and registers it with the new one.
If the old directory manager is not available, Storage Manager
Pro displays a message letting you know that it could not
unregister you from the old management set. You should
check that the old directory manager is turned on, has the
Storage Manager Pro service (ASMProServer) or daemon
running (see
Starting Adaptec Storage Manager Pro
on page 1-3),
and that it is accessible on your network. Then try the above
steps again.
Summary of Contents for 2110S - SCSI RAID Controller
Page 1: ...R Adaptec Storage Manager Pro v1 11 User s Guide...
Page 6: ......
Page 137: ...B 7 Choosing Your Array Type...