Adaptec 2110S - SCSI RAID Controller, User Manual, Page: 22 / 158

1-11
Getting Started
■ Refresh—View an updated representation of your selection.
This is useful, for example, when you have taken a system
down for repair, then brought it back up.
Using System Filters
You can use a filter to control which system you view. You can select
a system by name or by IP Address.
You can also select a group of systems to view by using the
following wildcard operators:
■
* is a string wildcard that matches 0 or more characters in the
query.
■
? is a single-character wildcard that matches any single
character in the query.
You can position wildcard operators at the beginning, middle, or
end of a query word and you can combine them within a word; for
example, ?yst*.