manualshive.com logo in svg

Adaptec 2100S - SCSI RAID Controller, Quick Start Manual, Page: 26 / 40

Share
Download
Adaptec 2100S - SCSI RAID Controller Quick Start Manual Download Page 26

25

4

When the PCI Memory controller installation is complete, another 
Found New Hardware wizard may start for a SCSI/RAID 
Controller. Insert the Adaptec CD into the CD-ROM drive. Select 
the your CD-ROM drive, then click 

Next

.

Upgrading a Windows NT System

Note: 

If you have already installed an Adaptec controller into 

your system and want to change drivers, refer to the 

Installation Guide

 for your controller.

To upgrade an existing Windows NT 4.0 system and also add a 
SCSI RAID controller, see the 

Installation Guide

 for your controller.

Novell NetWare

Note: 

The most recent NetWare Support Pack will have the 

Novell I

2

O drivers. These drivers might be newer than the 

ones from Adaptec but have not been fully tested for 
compatibility with Adaptec controllers.

Adaptec drivers for NetWare are included on the CD-ROM. The 
drivers are located in the 

\packages\netware

 subdirectory. Copy the 

appropriate files to a floppy disk and follow the NetWare installation 
procedure. The NetWare package also includes a utility that installs 
Storage Manger Pro for NetWare or the modules which allow you to 

Summary of Contents for 2100S - SCSI RAID Controller









































Reviews:

No comments