manualshive.com logo in svg

Adaptec 2100S - SCSI RAID Controller, Quick Start Manual, Page: 11 / 40

Share
Download
Adaptec 2100S - SCSI RAID Controller Quick Start Manual Download Page 11

10

Note: 

Adaptec SCSI RAID controllers must have at least one 

32MB memory module installed.

4

Install the controller and storage devices in the appropriate 
enclosures. Attach all cables between the controller and the storage 
devices.

5

Run Storage Manager on ROM (SMOR) by pressing 

Ctrl+A

 during 

system boot. SMOR lets you configure the controller and verify 
proper hardware configuration. You can also use SMOR to 
configure your storage subsystem and disk arrays before installing 
the operating system.

6

Install the I

2

O driver for your operating system. You can also install 

Storage Manager Pro or Storage Manager on operating systems that 
support these applications.

Storage Manager Pro and Storage Manager are included on the 
Adaptec CD. If you are using a Microsoft Windows operating system, 
they can be installed automatically by the Adaptec Autorun install 
utility. A version of Storage Manager Pro for NetWare and versions of 
Storage Manager for SCO UNIX and Linux are also included on the 
installation CD-ROM. Refer to 

Installing Adaptec Storage Management 

Software

 on page 32 for specific information.

Summary of Contents for 2100S - SCSI RAID Controller









































Reviews:

No comments