LINK
Silverado|Suburban|Tahoe|Sierra|Yukon|Escalade 2014 & 2018 |Driver FRONT p. 25
40.
Now that the
LINK
is in its ‘HOME’ position, RESET the unit by pressing ‘CONFIRM RESET’. A screen will pop
up to ask: ‘ARE YOU SURE YOU WANT TO RESET?’ Press ‘ACCEPT’. The
LINK
will emit two (2) audible beeps
to confirm ‘RESET’, and will now be in reduced power mode. In pendant mode, run one full cycle to exit
reduced power mode.
41.
The installation is now finished. Plug in the 9V battery. Check the voltage on the 9V battery. To do this, on
the tablet, under INFO |
LINK
MANAGEMENT | DIAGNOSTIC. The real voltage will be listed. Unplug the
Bluetooth module and plug in the hand pendant. Make sure the
LINK
hand pendant is working properly.
Cycle the
LINK
in and out a few times, both with and without a passenger to make sure all shrouds are
properly installed and that nothing is rubbing or requires adjustment. Make a visual inspection while the
LINK
is in movement that all the wiring follows the seat and does not risk being severed at any time.
For technical support call 866.641.0419 or email
Please have the serial number of the unit on hand before placing your call.
