LINK
Silverado|Suburban|Tahoe|Sierra|Yukon|Escalade 2014 & 2018 |Driver FRONT p. 3
BEFORE STARTING THE INSTALLATION:
Make sure the steering wheel adjustment is fully
UP
and
IN
to allow maximum clearance for the driver
seat. When installing the
LINK
with hand controls, hand controls should be installed
after
the
LINK
.
1.
Remove the driver side OEM seat and place it on a workbench or table. To do this, start by
disconnecting the seat belt from the side of the seat. Then, remove the four OEM bolts; two at the
rear of the seat and two at the front of the seat. Then, unplug the seat wire harness from the floor
connector.
