Page 4
Adamson Systems Engineering | IS10 User Manual
In an effort to continuously improve its products, Adamson releases updated accompanying software, presets and
standards for its products.
Adamson reserves the right to change the specifications of its products and the
content of its documents without` prior notice.
• The IS10 is an ultra compact line array enclosure designed for extended throw capabilities. It has an unobtrusive
visual design which blends seamlessly into the surrounding space. It contains two symmetrically arrayed 10”
transducers and a 4” compression driver mounted on an Adamson waveguide.
• Up to 16 IS10 can be flown in the same array when using the IS10 & IS119 Support Frame (930-0028) and up to
4 when using the IS10 Micro Frame (930-0030). Due to the use of Controlled Summation Technology, the IS10
maintains a consistent nominal horizontal dispersion pattern of 110° down to 250Hz.
• The high frequency waveguide is designed to couple across the entire intended frequency band without loss of
coherence. There are 9 rigging positions available, spanning 0° to 10°.
• Adamson’s use of proprietary techologies such as Controlled Summation Technology and Advanced Cone
Architecture give the IS10 an extremely high maximum SPL level of 141.3 dB. The nominal impedance of the IS10
is 8 Ω per band, maximizing amplifier efficiency.
• The operational frequency range of the IS10 is 60Hz to 18kHz, +/- 3 dB.
• The IS10 is intended to be used as a standalone system or with the IS119 companion subwoofer, which brings the
usable frequency range down to 30Hz.
• The wooden enclosure is made of marine grade birch plywood, and has a steel rigging system mounted on each
corner. Without sacrificing low resonance to composite material, the IS10 is able to maintain a low weight of 25.6
kg / 56.5 lbs.
•
The IS10 is designed for use with Lab.gruppen’s D-Series line of installation amplifiers.
Product Introduction
IS10 Sub Compact Line Array
Summary of Contents for IS10
Page 1: ......
