Page 7
Adamson Systems Engineering | IS10 User Manual
Page 7
Adamson Systems Engineering | IS10 User Manual
Presets & Control
Presets
IS10 Lipfill
Intended for use with a
single IS10
IS10 Short
Intended for use with an
array of 6-7 IS10
IS10 Array
Intended for use with an
array of 8-9 IS10
IS10 Large
Intended for use with an
array of 10-12 IS10
The Adamson LoadLibrary, found on the Adamson website, contains presets designed
for a variety of IS10 applications. Each preset is intended to be phase-linear with either
the IS118 or IS119 subwoofers when time-aligned.
For a master list, please refer to the Adamson PLM & Lake Handbook, found on our
website.
Tilt overlays
(found in the
Array Shaping folders of the Adamson LoadLibrary
) can be used to alter the overall acoustic
response of an array. Tilt overlays apply a filter, centered at 1kHz, which reaches the noted decibel cut or boost at the
extreme ends of the listening spectrum. For example, a +1 Tilt will apply +1 decibel at 20kHz and -1 decibel at 20Hz.
Alternately, a -2 Tilt will apply -2 decibels at 20kHz and +2 decibels at 20Hz.
Control
Summary of Contents for IS10
Page 1: ......