Adam ADI0009, Use & Care Manual

Page: 7 / 16

0 7
SECTION 03
INSTALLATION
Important Electrical Safety
The fire must NOT be located immediately below a socket outlet. The socket must
always be accessible in order to disconnect the fire from the electrical supply for
maintenance and cleaning or isolation in an emergency.
NOTE: Please take care when installing the fire as some edges may be sharp.
Before installation, please ensure that secure anchor points can be made to the wall. If
in doubt, please seek advice from a suitably qualified tradesman.
Please ensure that the minimum amount of space is left around the electric fire when it
is installed. See the image below for details.
WARNING: Make sure the appliance’s air inlets are not blocked to allow for ventilation.
WARNING:
Check the wall to ensure there are no wires, pipes etc in the area to be drilled.
Do not plug in the fire before wall mounting.
NOTE: Depending on the fascia style, your product may or may not be packaged with
the fascia already attached.
.
.
HEAT OUT
AIR IN
(CEILING/PICTURE FRAME)
(FLOOR)
Minimum
1000mm)
Minimum
100mm
Minimum
300mm
Minimum
300mm
This product
MUST be installed
with the MINIMUM
required distances
at the FOUR SIDES
OF THE FIRE.
!