Adam ADI0009, Use & Care Manual

Page: 5 / 16

0 5
SECTION 01
INTRODUCTION
Thank you for choosing this wall mounted electric fire. The fire is designed to meet the
most stringent quality, performance and safety requirements. This guide aims to
improve your understanding and appreciation of your new fire by providing simple
and informative assembly instructions.
HANDLING
Before continuing any further with the installation of this fire please read the following:
• When lifting always keep your back straight. Bend your legs and not your back.
• Avoid twisting at the waist; it is better to reposition your feet.
• Avoid upper body / top heavy bending. Always bend from the knees rather than
the waist.
• Do not lean forward or sideways whilst handling the fire.
• Always grip with the palm of the hand; do not use the tips of fingers for support.
• Always keep the product as close to the body as possible; this will prevent
unnecessary and undue strain on the body.
• Use gloves to provide additional grip.
• Always use assistance if required.
UNPACKING
The unit is supplied either in ONE (complete unit) or TWO (fascia and heater separate)
cartons. Carefully unpack the product using the following procedure:
• Carefully lift the complete unit or fascia and heater from their carton and put aside.
• Carefully remove the protective wrapping from the parts.
• Locate the fixing pack and put aside.
• Locate the pebble set (if supplied) and put aside.
• Ensure the supply requirements indicated on the rating label fixed to the side of
the product is compatible with the supply voltage available.