1 0
SECTION 03
USE
The appliance is controlled using 3 switches, located
to the left of the heater unit
.
Use the following sequence to operate. The grey represents a ‘pressed switch.’
A switch is in the ON position when the side with the markings on (e.g. I or II) is 'pressed
in’.
On/Off
1kW Heat setting 2kW Heat setting
CARE
•
Check the supply cord for damage regularly. Never operate the stove if it has a
damaged cord or plug.
• There are no specific requirements for the care of this unit, other than general
cleaning.
• Switch off and unplug from the power supply before assembling or disassembling
and cleaning.
• Brushed stainless steel, chrome or brass effect features can be cleaned using a
cloth and a non-abrasive propriety cleaner. Other features can be cleaned using a
damp cloth.
• The area around the fire should be kept free from animal hair, lint and other
material that may be drawn into the workings of the appliance which
could affect its performance.
• When transporting or storing the unit and cord, keep in a dry place, free from
excessive vibration.
Controls
Summary of Contents for ADI0009
Page 14: ...1 4 S E C T I O N 0 3 NOTES...
Page 15: ...1 5 S E C T I O N 0 3 NOTES...
