4
WALL MOUNTING
DANGER!
Dropping the speaker system may cause injury to personnel
and or property damage.
There is a risk that the speaker system could fall down until it
and the mounting are attached to cylindrical bracket
B
. As long
as this installation has not yet been carried out, the speaker
system must be held by another qualified specialist. The above
requirements also apply to this specialist. In addition, you must
provide any additional means to prevent the speaker from
falling down during assembly.
→ The distance of the monitor from the wall is determined by the
position of the cylindrical bracket
B
. When delivered, the holder
is in the middle position. If you wish to use either the rear or
front positions instead, please proceed as follows:
- Use the hexagonal wrench
G
(key width: 4 mm) to loosen
the four hexagonal socket screws
F
, that secure the retaining
ring
C
.
- Remove the retaining ring
C
.
- Use the hex wrench
H
(key width: 5 mm) to loosen the four
hexagonal socket head screws
D
, which attach the cylindrical
bracket
B
to the wall bracket.
